01.02
4.4.7
Sharpness
Five levels of sharpness are available.
The sharpness can only be adjusted if the picture has a higher or lower resolution
than the display. Assigning a relative unsharpness can, to an extent, reduce
interpolation artefacts which occur during picture expansion. This means that the
user finds characters more easily readable. A value of 1 gives minimum non-
sharpness and 5 give maximum non-sharpness.
4.4.8
Zooming
This function enables information in the middle of the display to be enlarged as if
viewed through a magnifying glass.
The selected zoom factor remains active after the OSD menu has been exited.
4.4.9
Language
The language of the OSD menu is selected here.
At the moment, English is the only language available.
High-Resolution 18" LCD Monitors SCD 1898-I/IT
A5E00120696
Instruction manual
31