Installing & Replacing The Oven Light - Waring WCO250XE Manual

INSTALLING & REPLACING THE OVEN LIGHT
In the top right-hand corner of your oven is a halogen lightbulb,
which offers a longer lifespan than standard lightbulbs and is able
to withstand high temperatures. Purchase a new 230V/25W
G9 halogen lightbulb at your local hardware store and insert it
as follows:
1. Be sure that the oven is unplugged and completely cooled.
2. Remove the screw from the cover with a Phillips head screw driver.
3. Remove the cover.
4. Remove the old lightbulb by pulling it out of the socket base
(toward the front of the oven).
5. Follow the guidelines on the lightbulb instructions about not
touching the lightbulb with your bare hand, as this will reduce
the lifespan. You can use a clean tissue or cloth glove to hold the
bulb. Install the new bulb in the socket base by gently pushing it into
place.
6. Replace the cover and secure it tight with a Phillips head screw driver.
Any other servicing should be performed by an authorized service
representative.
Open Glass
Lens Covering
Then Remove.
Tab of Oven Light Cover
Slot of Oven Light Compartment
15
Phillips Screw
Oven Light Cover