Maple Systems RMI5001 Installation Manual page 2

2
Static Awareness
Do NOT remove the cover of your RMI5001 product – doing so will void
your warranty. When the cover is removed the circuitry inside is exposed
to possible damage by electrostatic discharge during handling. Minimize
the possibility of electrostatic discharge by:

Discharging personal static by grounding yourself prior to
handling the HMI.

Handling the HMI at a static-free grounded workstation.

Connecting the frame ground (
clean earth ground.

Placing the HMI in an antistatic bag during transport.
Unpacking the Unit
Carefully unpack the HMI. Check all material in the container against the
packing list. Maple Systems will not accept responsibility for shortages
against the packing list unless notified within 30 days. The equipment
and accessories were inspected and tested by Maple Systems before
shipment. Examine the equipment carefully; if any shipping damage is
evident, notify the carrier immediately. Maple Systems is not responsible
for claim negotiations with the carrier. Save the shipping container and
packing material in case the equipment needs to be stored, returned to
Maple Systems, or transported for any reason.
RMI5001 Series HMI
Power Connector
RMI5001 Installation Guide
Warranty
A copy of the Warranty and Limitation of Liability is contained in the
product box. It can also be found on our website.
1010-1019 Rev 04
) connector of the HMI to a
Packing List
RMI5001 Installation Guide
www.maplesystems.com