Built-in wine and beverage refrigerator (19 pages)
Summary of Contents for EdgeStar OBR901SS
Page 1
Outdoor Beverage Refrigerator OBR901SS Owner’s Manual For more information on other great EdgeStar products on the web, go to http://www.edgestar.com To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com V2.0-07262019...
Important Safety Information Improper handling can cause serious damage to the EdgeStar outdoor beverage refrigerator and / or injury to the user. This outdoor beverage refrigerator is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty.
Page 3
General Safety • To prevent back and other types of injuries, use at least two people to move and install the unit. • This appliance is not intended for use by persons, including children, with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Thank you for purchasing this EdgeStar outdoor beverage refrigerator. We hope that this purchase will be the beginning of a lasting and rewarding relationship between you and EdgeStar. We will provide the customer support and exemplary products necessary to nurture that relationship.
Parts Identification Tip: Gather the model and serial number from the product label and write them down before installing the outdoor beverage refrigerator. Front View Back View...
Internal Fan This unit is equipped with an internal fan that maintains a consistent internal temperature. Installing the Outdoor Beverage Refrigerator The outdoor beverage refrigerator should be installed in accordance with local electrical code requirements. The refrigerator should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty.
Installation Clearance Requirements Important Notes: • Choose a location that has ambient temperatures above 40° F and below 100° F. Operation outside these temperatures may result in lowered efficiency or cause other adverse effects. • This unit MUST be installed in an area protected from the elements, e.g. dust, sand, rain, water spray or drips, sleet, and snow.
Electrical Requirements ELECTRIC SHOCK HAZARD! • Plug into a grounded 3-prong outlet. • Never remove the grounding prong from the plug. • Never use an adapter to bypass the grounding prong. • DO NOT use an extension cord. • Failure to follow these instructions can result in fire, electrical shock, or death. Before you move your outdoor beverage refrigerator into its final location, it is important to make sure you have the proper electrical connection: A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National...
Installing and Removing the Shelves To prevent damaging a door gasket, make sure to open the door all the way before pulling the shelves out of their track. To Install the Shelves: 1. Open the door completely. 2. Place the back of the shelf onto the shelf track with the front of the shelf elevated at a 45° angle.
Operation Control Panel Overview Button Function This button is used to turn the interior light on or off. Light Set Temperature This button is used to adjust the temperature. This button increases the set temperature in 1 degree increments. This button decreases the set temperature in 1 degree increments. Down Indicator Function...
Adjusting the Temperature To adjust the temperature: Press the SET button. Press the Down button to decrease and the Up button to increase the temperature by 1 degree increments. When the desired temperature appears in the DISPLAY window of the control panel, press the SET button to confirm.
Normal Sounds Your new outdoor beverage refrigerator may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor and walls can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them.
Cleaning and Maintenance Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. Exterior Cleaning Unplug your beverage refrigerator. Clean the outside with a cloth dampened in mild soapy water. Dry thoroughly with a soft cloth. To clean the door gasket, use only mild soapy water. Never use harsh cleansers or scouring pads to clean any part of your unit.
Read and follow the “Installation Clearance suggested ventilation. Requirements” section. The outdoor beverage cooler The thermostatic sensor has Contact EdgeStar customer displays a Probe Error. malfunctioned. service. The outdoor beverage cooler There is a power failure. Ensure the cooler is plugged does not turn on.
Page 16
Troubleshooting Continued Symptoms Possible Causes Solutions The body of the outdoor The unit is not grounded Contact your local electrician beverage refrigerator is properly. to test your electrical electrified. grounding system. Frost is forming in the outdoor The environment is humid. Though the unit uses an “auto-defrost”...
Specifications Note: Technical data and performance information are provided for reference only. Description of product Built-in Outdoor Beverage Refrigerator Model OBR901SS Voltage / Frequency AC 115V~60Hz Amperage 2.0 A Color Stainless Cabinet; Glass Door with Stainless Trim Storage Capacity 84 Cans Refrigerant R134a, 2.3 oz.
WHAT IS COVERED: For a period of ONE (1) YEAR from the date of original retail purchase, EdgeStar will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship. Labor will be performed free of charge at an authorized EdgeStar repair facility and EdgeStar will supply new, rebuilt, or refurbished parts free of charge.
Need help?
Do you have a question about the OBR901SS and is the answer not in the manual?
Questions and answers