Determining The Installation Position; Environment Requirements - Huawei SUN2000 Series User Manual

SUN2000-(8KTL-20KTL)-M2
User Manual
Type Tool
Heat shrink tubing
PPE
Safety gloves

4.3 Determining the Installation Position

4.3.1 Environment Requirements

Basic Requirements
●
●
●
●
●
●
●
Mounting Structure Requirements
●
●
●
Issue 01 (2020-07-02)
Heat gun
Safety goggles
The SUN2000 is protected to IP65 and can be installed indoors or outdoors.
Do not install the SUN2000 in a place where personnel are easy to come into
contact with its enclosure and heat sinks, because these parts are extremely
hot during operation.
Do not install the SUN2000 in areas with flammable or explosive materials.
Do not install the SUN2000 at a place within children's reach.
Do not install the SUN2000 outdoors in salt areas because it will be corroded
there and may cause fire. A salt area refers to the region within 500 meters
from the coast or prone to sea breeze. The regions prone to sea breeze vary
depending on weather conditions (such as typhoons and monsoons) or
terrains (such as dams and hills).
The SUN2000 must be installed in a well-ventilated environment to ensure
good heat dissipation.
Recommended: Install the SUN2000 in a sheltered place or a place with an
awning.
The mounting structure where the SUN2000 is installed must be fireproof.
Do not install the SUN2000 on flammable building materials.
The SUN2000 is heavy. Ensure that the installation surface is solid enough to
bear the weight load.
Copyright © Huawei Technologies Co., Ltd.
Cable tie
Anti-dust respirator
4 Installation
Hydraulic pliers
Safety shoes
21