Preparing For Installation - Huawei SUN2000 Series User Manual

SUN2000-(8KTL-20KTL)-M2
User Manual

5.1 Preparing for Installation

Figure 5-1 SUN2000 cable connections (optional in dashed boxes)
If the Smart Dongle is configured, you are advised to install the Smart Dongle
before connecting the signal cable.
Table 5-1 Component description
No. Component
A PV module
B Smart PV optimizer
C DC switch
D
Smart Dongle
Issue 01 (2020-07-02)
NO TICE
Description
● A PV string is composed of the PV
modules connected in series.
● The SUN2000 supports the input
from four PV strings.
The SUN2000-450W-P smart PV
optimizer is supported.
Recommended: a PV circuit breaker
with a rated voltage greater than or
equal to 1100 V DC and a rated current
of 15 A.
● WLAN-FE Smart Dongle:
a
SDongleA-05.
● 4G Smart Dongle: SDongleA-03.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
Source
Prepared by the customer
Purchased from Huawei
Prepared by the customer
Purchased from Huawei
33