SUN2000-(8KTL-20KTL)-M2
User Manual
----End
4.5.2 Support-mounted Installation
Prerequisites
Prepare M6 stainless bolt assemblies (including flat washers, spring washers, and
M6 bolts) with appropriate lengths as well as matched flat washers and nuts
based on the support specifications.
Procedure
Step 1 Determine the hole positions based on the marking-off template, and then mark
the hole positions using a marker.
Figure 4-13 Determining hole positions
Step 2 Drill holes using a hammer drill.
Issue 01 (2020-07-02)
NO TE
You are advised to apply anti-rust paint on the hole positions for protection.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
29