Installing The Inverter; Electrical Connections; Preparing For Installation - Huawei SUN2000 Series Quick Manual

Installing the Inverter

2.2
When drilling holes, avoid the water pipes and power cables buried in the wall.
1. Install the mounting bracket.
•
M6x60 expansion bolts are delivered with the inverter. If the length and number of the bolts do
not meet installation requirements, prepare M6 stainless steel expansion bolts by yourself.
•
The expansion bolts delivered with the inverter are used for solid concrete walls. For other types
of walls, prepare bolts by yourself and ensure that the wall meets the load bearing requirements
of the inverter.
•
Loosen the nuts, flat washers, and spring washers of the two expansion bolts.
2. Install the inverter on the mounting bracket.
Prepare an anti-theft lock suitable for the lock hole diameter (Ф8 mm) and ensure that the lock can
be installed successfully. An outdoor waterproof lock is recommended.
3

Electrical Connections

Preparing for Installation

3.1
3. (Optional) Install an anti-
3
theft lock.