Table of Contents
Advertisement
Model W1687 (For Machines Mfg. Since 9/11)
General
Regular periodic maintenance on your machine will
ensure its optimum performance. Make a habit of
inspecting your machine each time you use it.
Check.for.the.following.conditions.and.repair.or.
replace.when.necessary:
•
Loose mounting bolts.
•
Worn switch.
•
Worn or damaged cords and plugs.
•
Almost full collection bag.
•
Any other unsafe condition.
Lubrication
Since all bearings are shielded and permanently
lubricated, simply leave them alone until they need to be
replaced. Do not lubricate them.
Cleaning.Bags
Always empty the collection bags on a regular basis.
Emptying the collection bags allows the machine to oper-
ate at a much higher level of efficiency.
Always wear the appropriate respirator or dust mask and
safety glasses when emptying the collection bags. Small
dust particles can escape the bags during emptying, caus-
ing them to become airborne and easily inhaled. This
microscopic airborne dust is extremely unhealthy to
breathe and can cause serious health problems.
While the Model W1687 excels at collecting the majority
of wood dust produced by your machines, it is not an air
filter; therefore, we strongly recommend the supplemen-
tal aid of a shop air filter such as the Model W1746 or
W1690 (see Accessories on Page. 28). Air filters are
designed to collect the smaller dust particles in the air
that escape from the dust collector bags.
MAINTENANCE
-31-
MAKE. SURE. that. your. machine. is.
unplugged. during. all. maintenance. pro-
cedures!.If.this.warning.is.ignored,.seri-
ous.personal.injury.may.occur.
Always wear a respirator and safety
glasses when emptying dust collection
bags on the dust collector. Sawdust may
cause allergic reactions or respiratory
problems.
Advertisement
Table of Contents
