Table of Contents
Advertisement
Model W1687 (For Machines Mfg. Since 9/11)
Assembly
To.assemble.the.dust.collector,.do.these.steps:
1.. Place the base upside down on a clean, flat surface
(to avoid scratching the paint.)
2. Attach the casters to the base with (16)
flange bolts, as shown in Figure.6.
3. Turn the base over, align the motor and impeller
with the mounting holes, then secure the assembly
with (4)
⁄
"-8 x
⁄
5
1
16
7. The intake portion should be near the edge.
4. Place a rubber gasket around the impeller outlet
rim, as shown in Figure.8.
⁄
5
" flange bolts, as shown in Figure
2
"-8 x
⁄
"
1
16
2
Figure.6. Installing caster to base.
Figure.7. Installing caster to base.
Gasket
Figure.8. Positioning impeller outlet
-13-
x 16
x 4
gasket.
Advertisement
Table of Contents
