Table of Contents
Advertisement
5. Secure the metal "Y" outlet to the impeller outlet
with (8)
⁄
"-18 x
5
1
16
Figure.9.
6. With assistance, place one of the rubber gaskets
around the rim of the intake on one of the
collectors, then secure the collector to the metal
"Y" outlet with (8)
Figure.10).
Note: The collector attaches to each support
bracket. The inside of the collector is funnel shaped
and directs the air around in a cyclonic motion.
7. Repeat Step.6 for the other collector. The assembly
should now look similar to Figure.11.
⁄
" flange bolts, as shown in
2
⁄
"-18 x
⁄
" flange bolts (see
5
1
16
2
Model W1687 (For Machines Mfg. Since 9/11)
x 8
Figure.9. "Y" outlet installed.
x 8
"Y" Outlet
Figure.10. Collector installed.
Figure.11. Example of collectors installed.
-14-
"Y" Outlet
Collector
Gasket
Advertisement
Table of Contents
