Woodstock SHOP FOX W1687 Owner's Manual page 18

Model W1687 (For Machines Mfg. Since 9/11)
8. Wrap a foam strip around the outside top rim of the
collector (see Figure.12).
9. Trim any excess from foam strip so the ends come
together evenly, as shown in Figure.13.
10. Wrap a foam strip around the outside bottom rim
of the collector and trim the excess, as shown in
Figure.14.
Install the remaining foam strips on the other side.
Figure.12. Installing foam strip around top
Figure.13. Ends of foam strip trimmed to
come together evenly.
Narrow
Foam Strip
Figure.14. Foam strip installed around
bottom of collector.
-15-
of collector.
Foam Strips
Ends Even