Exido 12130064 Manual page 25

CLEANING
When cleaning the appliance, you should
pay attention to the following:
- Remove the plug from the mains
socket, and allow the appliance to
cool down completely before cleaning
it.
- Never submerge the appliance base,
cord or plug in water, and no water
must be allowed to enter the appli-
ance base.
- Clean the appliance and base by wip-
ing with a damp cloth. A little deter-
gent can be added if the appliance is
heavily soiled.
- Do not use scouring pads, steel wool
or any form of strong solvents or
abrasive cleaning agents to clean the
appliance, as they can damage the
external surfaces of the appliance.
- IMPORTANT! Allow the appliance to
dry fully after cleaning before using
again.
- The appliance must not be used if the
base or the underside of the appli-
ance is wet.
- Ensure the appliance is clean and dry
before storage.
UK
DESCALING
The lime content of ordinary tap water
means limescale may gradually be depos-
ited inside the appliance. This limescale
may be loosened using acetic acid (NOT
ordinary vinegar) or descaler, available in
supermarkets, etc.
1. Mix 100 ml acetic acid with 300 ml
cold water, or follow the instructions
on the descaler packaging.
2. Pour the solution into the appliance
and switch on using the On/Off but-
ton.
3. Boil until the appliance switches off
automatically.
4. Leave the solution in the appliance for
approx. 10 minutes before emptying.
5. To remove the last residues of lime
scale and acetic acid, fill the appli-
ance with fresh cold water and boil.
Do this three times. The appliance is
now ready for use.
25