Battery Insertion/ Exchange; Operating Elements; Handling And Operation; Switching The Appliance On/Off - Powerfix Profi PLPRS A1 Operating Instructions Manual

Battery insertion/ exchange

This wax melter requires 2 x 1.5 V batteries, type
AA/LR6/Mignon, for operation.
♦
♦
GB
♦

Operating elements

Handling and operation

In this chapter you will receive important infor-
mation for the handling and operation of the
appliance.
Switching the appliance on/off
♦
♦
♦

Application example

Preparation (Fig. A)
♦
Colour selection (Fig. B)
♦
26
Open the battery compartment
underside of the wax melter
Place the batteries into the battery compart-
ment , following the polarity details as
depicted in it.
Close and secure the battery compartment.
Wax melter
Wax melter tip
On/Off switch
Activation button
Battery compartment
Cleaning scraper
Scraper with planer function
Scraper with curvature
Sanding sponge
Cleaning cloth
To switch the appliance on, place the On/
Off switch at the position "ON".
Press and hold the activation button
heat up the wax melter tip
To switch the appliance off , place the On/
Off switch at the position "OFF".
Clean the damaged area with the spatula
and remove all loose parts. Press the edges
of the damaged area round.
Select the matching colour tone.
Ensure that several colour tones, from light to
dark, are always used. With real wood, it is
recommended to additionally work with trans-
parent (K), so as to achieve a sense of depth.
on the
.
to
.
PLPRS A1