Fritz! Fritz! BOX FON Ata 1020 Installation, Configuration And Operation page 65

VoIPon www.voipon.co.uk
Using FRITZ!Box Fon ata Features on the Analog Line
Using FRITZ!Box Fon ata Features on the Analog
Line
When FRITZ!Box Fon ata is connected to an analog line, a fea-
ture can be activated directly at the switching station only if
the line is set for this kind of configuration.
N
sr
<feature>
Call Forwarding (Call Diversion via the Central
Exchange)
Call forwarding is performed by the ISDN operator's switch-
ing station. To use call forwarding, FRITZ!Box Fon ata must be
connected to an ISDN line. Then this feature can be used to
forward calls to an external line. Call forwarding is subject to
charges by the network provider and cannot be used for for-
warding to an Internet number.
In addition to call forwarding, there is also call diversion via
FRITZ!Box Fon ata. Use this kind of call diversion to divert
calls to internal and external lines. See the section "Call Di-
version over FRITZ!Box Fon ata" from page 62 for more infor-
mation.
Do not activate both call forwarding and call diversion at the
same time.
For call forwarding you may specify whether you want incom-
ing calls to be forwarded unconditionally, after the fifth ring,
or when busy. Different settings may be configured separate-
ly for each number.
FRITZ!Box Fon ata – 7 Configuration and Operation by Telephone
sales@voipon.co.uk
Pick up the handset.
Dial the sequence shown at left.
Next enter the keyboard shortcut your net-
work provider has defined for the desired
feature. The given keyboard shortcut must
be obtained from your network provider.
Tel: +44 (0)1245 808195
65
Fax: +44 (0)1245 600030