Entering Numbers For Calls Over Fixed Lines; Configuring Analog Terminal Devices At Fritz!Box Fon Ata - Fritz! Fritz! BOX FON Ata 1020 Installation, Configuration And Operation

4.2 Entering Numbers for Calls over Fixed Lines

4.3 Configuring Analog Terminal Devices at
FRITZ!Box Fon ata
VoIPon www.voipon.co.uk
If you have an analog telephone line, you do not need to set
up any numbers for fixed-line telephony.
If you have connected FRITZ!Box Fon ata to an ISDN tele-
phone line, you must configure numbers for fixed-line tele-
phony. Proceed as follows:
1. Start a web browser.
2. Enter "fritz.fonata.box" as the URL.
3. Open the "Telephony / Extensions" menu.
4. Click the "ISDN Numbers" button.
5. On the "ISDN Numbers" page, enter in the appropriate
fields all of the telephone numbers (MSNs) you re-
ceived from your telephony carrier.
6. Click the "Apply" button.
FRITZ!Box Fon ata is configured so that you can make calls to
the analog network immediately after connecting analog ter-
minal devices, without any additional settings required.
The following settings are configured at the analog lines
"FON1" and "FON2":
calls can be accepted on both lines: connected terminal
devices will ring at the same time
outgoing calls can be conducted on both lines
If the connected terminal devices are to react only to certain
numbers, numbers must be assigned to the extensions. The
number defined as "Number of the extension" also defines
whether calls from this extension will be conducted using
the fixed-line network or the Internet.
FRITZ!Box Fon ata – 4 Making Calls with FRITZ!Box Fon ata
sales@voipon.co.uk
Entering Numbers for Calls over Fixed Lines
Tel: +44 (0)1245 808195
37
Fax: +44 (0)1245 600030