Standard Accessories - Hitachi GP 10DL Handling Instructions Manual

English

STANDARD ACCESSORIES

1 Accessories × 40 pcs ...................... 1
GP10DL 2 Battery (BCL1015) ........................... 1
(LCSK) 3 Charger (UC10SFL) ......................... 1
4 Plastic case ..................................... 1
GP10DL
1 Accessories × 40 pcs ...................... 1
(NN)
Provided attachments
<Uses>
Aluminium oxide point [ 15.9 mm × 1]
Use for wood
engraving and
15.9 mm
grinding.
Silicon carbide point [ 4.8 mm × 1]
Use to machine hard
materials such as
4.8 mm
glass and ceramics.
Use to engrave, High-speed cutter [ 3.2 mm × 1]
grind and make
grooves in wood,
plastic and soft
3.2 mm
metals (aluminium,
copper, brass).
Drill [ 3.2 mm × 1]
Use to make holes in
wood and plywood.
3.2 mm
Cutting wheel [ 23.8 × t0.6 × 6]
Use to slice or cut
materials.
23.8 mm
Suitable for cutting thin
rods and pipes.
Recuts crushed
Cutting wheel [ 23.8 × t1.0 × 2]
grooves in screw heads.
Do not press hard
23.8 mm
against workpiece as it
may crack.
Aluminium oxide grinding wheel [ 22.2 × 1]
Use to polish hard
materials such as
22.2 mm
stainless steel.
Sanding disc [ 19.1 mm/180-grit × 10]
Suitable for fi nal
polishing after rough
19.1 mm
grinding.
Polishing wheel [ 25.4 mm × 2]
Use to give smooth
fi nish to metal
25.4 mm
surfaces.
Felt polishing wheel [ 12.7 mm × 4]
Use for mirror
12.7 mm
polishing of jewelry
and metals.
Felt polishing wheel [ 25.4 mm × 2]
Choose the size to
suit the workpiece.
25.4 mm
Sanding band [ 12.7 mm/60-grit × 6]
Suitable for tasks such
as shaping wood and
12.7 mm
fi nishing models.
Grind in two stages
Sanding band [ 12.7 mm/120-grit × 2]
with diff erent grit
numbers to achieve a
12.7 mm
good surface fi nish.
10
0.6 mm
1.0 mm
180-grit
60-grit
120-grit
For details of the attachments, refer to "Provided
attachments".
Standard accessories are subject to change without
notice.
CAUTION
Standard attachments are exclusively for
use with the GP10DL. Do not use with other
equipment such as electric drills, etc. Doing so
may result in injury or damage to the tip tool.
[Accessory]
Collet spanner (for loosening
tight collet nuts)
Wheel mandrel
[ 3.2 mm × 1]
Screw-type mandrel
[ 3.2 mm × 1]
Drum mandrel
[ 3.2 mm × 1]