Front Panel Leds - Cisco CSA 90 Series Installation And Maintenance Manual

Status LEDs and Buttons for Maintenance
Status LEDs and Buttons for Maintenance
•
•

Front Panel LEDs

Figure 3-2
Figure 3-2
1
2
3
4
5
Table 3-1 Front Panel LEDs, Definitions of States
LED Name
1
Hard drive fault
2 Hard drive activity
Cisco x90 Series Content Security Appliances Installation and Maintenance Guide
3-2
Front Panel LEDs, page 3-2
Rear Panel LEDs and Buttons, page 3-4
shows the front panel LEDs.
Cisco C390 Email Security Appliance Front Panel LEDs
Hard drive fault LED
Hard drive activity LED
Power button/power status LED
Identification button/LED
System status LED
State
• Off—The hard drive is operating properly.
• Amber—Drive fault detected.
• Amber, flashing—The device is rebuilding.
Amber, flashing with one-second interval—Drive locate function activated.
•
Off—There is no hard drive in the hard drive tray (no access, no fault).
•
Green—The hard drive is ready.
•
Green, flashing—The hard drive is reading or writing data.
•
Chapter 3
Table 3-1 defines the LED states.
6 Fan status LED
7
Temperature status LED
8
Power supply status LED
9 Network link activity LED
Cisco C390 Email Security Appliance