Physio Logic Essentia+ Instruction Manual page 30

EssentiA Instruction Manual
+
Electromagnetic Compatibility Information
Table 3
Guidance and declaration of manufacturer-electromagnetic immunity
The device is intended for use in the electromagnetic environment specified below.
The customer or the user of the device should assure that it is used in such
an environment.
IMMUNITY test IEC 60601
test level
Conducted
3V for 0.15-
80MHz; 6V
RF IEC
in ISM and
61000-4-6
amateur radio
bands between
0.15-80MHz
Radiated RF 385MHz, 27V/m 385MHz, 27V/m
IEC 61000-4-3
450MHz, 28V/m 450MHz, 28V/m
710MHz,745
MHZ,780MHz
9V/m
810MHz,870
MHZ,930MHz
28V/m
1720MHz,1845
MHZ,1970MHz
28V/m
2450MHz,
28V/m
5240MHz,5500
MHZ,5785MHz
9V/m
Compliance Electromagnetic environment
level -guidance
Portable and mobile RF
3V for 0.15-
80MHz; 6V
communications equipment
in ISM and
should be used no closer to any
amateur radio
part of the device, including
bands between
cables, than the recommended
0.15-80MHz
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended seperation distance
710MHz,745 Where P is the maximum output
MHZ,780MHz
power rating of the transmitter
9V/m
in watts (W) according to the
transmitter manufacturer and d
is the recommended separation
810MHz,870
distance in metres (m).
MHZ,930MHz
28V/m
Field strengths from fixed RF
transmitters, as determined by
an electro magnetic site survey, a
1720MHz,1845
should be less than the compliance
MHZ,1970MHz
level in each frequency range.
28V/m
2450MHz, Interference may occur in the
28V/m
vicinity of equipment marked
with the following symbol:
5240MHz,5500
MHZ,5785MHz
9V/m
28
80 MHz to 800 MHz
800 MHz to 2.7 Ghz