Cleaning / Maintenance; Cleaning; Cleaning After Each Use - Silvercrest SRR 3 A1 User Manual And Service Information

Cleaning / maintenance

Cleaning

Unplug the shaver from the mains power supply before cleaning as
there is a risk of an electric shock!
Switch off the shaver before cleaning it in order to avoid hazards.
Never immerse the shaver in water or other liquids. Otherwise, liquid
will penetrate it because the casing is not watertight.
Do not use compressed air, scouring pads or corrosive cleaning
agents to clean the shaver.
It is recommended that the shaver is cleaned after each use to achieve
optimal shaving results.

Cleaning after each use

Remove the protective cover [1]. Then clean the
shaving heads of the shaving system [2] with the
enclosed cleaning brush.
SilverCrest SRR 3 A1
English - 11