Silvercrest SRR 3 A1 User Manual And Service Information page 18

SilverCrest SRR 3 A1
16 - English
Remove the shaving heads. A shaving head
consists of a guard and a razor blade.
Re-insert the new shaving heads in the shaving
unit. Make sure that the slot in the shaving head
lies in the channel of the shaving unit.
Re-insert the shaving head holder in the shaving
unit. Press the centre of the shaving head holder
until it audibly engages.
Close the shaving system [2] again until it audibly
engages. Put the protective cover [1] on again.