Installing 1394 Interface Unit Type 2600 - Ricoh AP2600 Setup Manual

E
Turn on the power switch.
Note
If the Network Interface Board is
installed correctly, the information
about network settings (e.g. IP ad-
dress) is listed in the configuration
page. See "Printing a Configuration
Page" in the Printer Reference pro-
vided as a PDF file on the CD-
ROM labeled "Operating Instruc-
tions".
Reference
For more information, see P.37
"Configuring the Printer for the Net-
work".
Installing 1394 Interface Unit
Type 2600
Note
See the inside front cover of this
manual to confirm which printer
(Type 1 or Type 2) you have.
The 1394 Interface Unit and the
Network Interface Board cannot be
installed to the printer at the same
time.
Important
In Windows 2000, the 1394 Inter-
face Unit can only be used with
Service Pack 1 or later. If the Serv-
ice Pack is not installed, the con-
nectable number of device in a
1394 bus is only one, and the client
cannot access the 1394 Interface
Unit without using an account has
the Administrators permission.
The optional 1394 Interface Unit is
not supported by Windows 95/
98/Me. If the "plug and play" func-
tion starts, click [Cancel] in the [New
Hardware Found] or [New Device Wiz-
ard] dialog box.
The 1394 Interface Unit can be
damaged by small amount of static
electricity. You should touch some
metal to discharge static electricity.
Use the 1394 interface cable that
comes with this printer.
Do not plug or unplug the 1394 in-
terface cable while installing the
printer driver.
Do not turn off or on the device
while installing the printer driver.
When the 1394 Interface Unit is in-
stalled, uninstall the printer driver
after the 1394 interface cable is un-
plugged.
Installing Options
2
31