Configuring The Printer For The Network With The Operation Panel - Ricoh AP2600 Setup Manual

3. Configuring the Printer for
Configuring the Printer for the Network
with the Operation Panel
After installing the optional Network
Interface Board, configure it for the
network using the printer's operation
panel.
Configure the printer for the network
using the printer's operation panel.
The following table shows the opera-
tion panel settings and their default
settings. These are included in the
"Host Interface" menu.
Reference
For information about configuring
the computer for the network, see
the Network Interface Board Oper-
ating Instructions provided as a
PDF file on the CD-ROM labeled
"Operating Instructions".
For information about "Host Inter-
face" menu, see "Host Interface
Menu" in the Printer Reference
provided as a PDF file on the CD-
ROM labeled "Operating Instruc-
tions".
the Network
Setting Name
IP Address
Subnet Mask
Gateway Address
Access Control
(Access Control
Address)
Access Mask
(Access Control
Mask)
Network Boot
Frame Type (NW)
(Frame type NetWare)
Active Protocol
Ethernet
*1
means that this protocol is active.
A
Press { { { { Menu} } } } .
Zdds020N.eps
Menu
On Line
Job Reset Escape
Form Feed Enter
Power Error
"Menu" appears on the panel dis-
play.
Value
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
None
Auto Select
TCP/IP *1
NetWare
*1
NetBEUI
*1
AppleTalk *1
Auto
Data In
37