Installing By Auto Run - Ricoh AP2600 Setup Manual

Installing by Auto Run

You can install the PCL and the RPCS printer drivers and software, and set them
up easily by using Auto Run.
Follow these steps to install the PCL and the RPCS printer drivers and software
on Windows 95/98/Me, Windows 2000, Windows NT 4.0.
Limitation
If your system is Windows 2000 or Windows NT 4.0, installing a printer driv-
er by Auto Run requires Administrators permission. When you install a print-
er driver by Auto Run, log on using an account that has Administrators
permission.
Note
Auto Run might not automatically work with certain OS settings. In this case,
launch "INSTTOOL.EXE" located on the CD-ROM root directory.
If you want to cancel Auto Run, hold down the {SHIFT} key (when your sys-
tem is Windows 2000, hold down the left {SHIFT} key) while inserting the CD-
ROM. Keep the {SHIFT} key held down until the computer has finished ac-
cessing the CD-ROM.
A
Close all applications that are running.
B
Insert the CD-ROM into the CD-ROM drive.
C
Follow the instructions on the screen.
D
Restart the computer after installation is complete.
E
Set up the options with the printer driver.
Installing by Auto Run
45
4