Table of Contents
Advertisement
3.2 EMC regulations
To comply with the current EMC regulations, it is necessary to connect the
lines leading in and out of the head-end station using cable terminals.
When mounting the cassette in an CSE 3319 head-end station which is in-
stalled in a 19" cabinet, make sure the connections leading in and out for
the 19" cabinet are made using cable terminals.
• Insert the required number of cable terminals in the openings provided in the
head-end station or in the 19" cabinet.
—> Cable terminals are not included in the scope of delivery.
Tighten the nut on the cable terminals until the teeth on the lock washer have
penetrated the exterior coating and a good connection is made between the
housing and cable terminal.
3.3 Connecting the cassette
• Connect the HF input cables to the "HF input" sockets of the cassette.
• Connect the head-end station to the mains.
HF input
Channel strip "B"
Channel strip "A"
- 7 -
- 7 -
HF input
Advertisement
Table of Contents
