Advertisement
3
STEP
Lay the twin slat kit (12) onto the bed. Fix in place using wood screws provided in the slat kit box.
FOR SLAT KIT ASSEMBLY follow assembly instructions included with slat kit.
4
Install the full and 3/4 guard rail assembly (09)(10) to the upper panel, and fix in place using Allen screws(C).
STEP
Tighten with the Allen wrench (H). Using wood screw (E) as shown below. Tighten with Phillips head
screwdriver (Customer Supplied).
Adult Assembly
C
C
GUARDRAIL CAN BE SET UP AT EITHER
END OF THE BUNK BED
12
C
FULL GUARD RAIL
C
3/4 GUARD RAIL
ASSEMBLY
10
09
E
Screw hole on end cap
go on inside of guard rail.
If the bunk bed will be placed next
to a wall, the guard rail that runs
the full length of the bed should be
placed against the wall to prevent
entrapment between the bed and the wall.
Adult Assembly
Customer Supplied
Phillips head
screwdriver
C
Allen Screw 2 3/4"
E
C
H
C
Allen wrench
Customer Supplied
Phillips head
screwdriver
Page 5 of 9
Advertisement
