Download Print this page

Advertisement

Quick Links

The length and width of the upper and lower bunk mattress and foundation are as follows :
Size
Twin
Full
Ensure thickness of upper and lower mattress and foundation combined does not exceed 9 ½"
and that the mattress is at least 5" below upper edge of guardrails.
Replacement parts, including additional guardrails, may be obtained from any
!
Follow the information on the warnings appearing on the upper bunk end structure
( 1 )
and on the carton. Do not remove warning label from bed.
Always use the recommended size mattresses or mattress support, or both,
( 2 )
to help prevent the likehood of entrapment or falls.
( 3 )
Surface of mattress must be at least 5 in. (127mm) below the upper edge of guardrails.
( 4 )
Do not allow children under 6 years of age to use the upper bunk.
( 5 )
Periodically check and ensure that the guardrail, ladder, and other component are
in their proper position, free from damage, and that all connectors are tight.
( 6 )
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Always use ladder for entering or leaving upper bunk.
( 7 )
( 8 )
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
( 9 )
Use of a night light may provide added safety precaution for a child using the upper bunk.
(10)
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and the wall.
(11)
The use of water or sleep flotation mattresses is prohibited.
(12)
STRANGULATION HAZARD : Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to, hooks, belts
and jump ropes.
(13)
Keep these instructions for future reference.
Size of Mattress and Foundation
Length
74"- 75"
74"- 75"
You must use only this size mattress.
This bunk bed uses a slat kit for mattress foundation.
Replacement Parts
SAFETY WARNINGS
Width
37 ½"- 38 ½"
52"- 53"
dealer
Thickness
9 ½" max
9 ½" max
!
Page 1 of 13

Advertisement

loading
Need help?

Need help?

Do you have a question about the Columbia Staircase Bookshelf and is the answer not in the manual?

Questions and answers

Summary of Contents for Atlantic Furniture Columbia Staircase Bookshelf

  • Page 1 Size of Mattress and Foundation The length and width of the upper and lower bunk mattress and foundation are as follows : Size Length Width Thickness Twin 74”- 75” 37 ½”- 38 ½” 9 ½” max Full 74”- 75” 52”- 53” 9 ½”...
  • Page 2 (TWIN - TWIN) (TWIN - FULL) (FULL - FULL) ASSEMBLE Before assembling your columbia staircase bookshelf, please read through these instructions carefully. Familiarize yourself with the different parts. Please note that you will require a phillips head screwdriver and an allen wrench.
  • Page 3: Parts List

    STAIRCASE BOOKSHELF PARTS LIST TWIN OVER FULL SHOWN HARDWARE A UPPER PANEL B UPPER PANEL LEFT, RIGHT END CAP END GUARD RAIL BACK GUARD RAIL SIDE GUARD RAIL HAND GUARD RAIL BOTTOM SHELF MIDDLE SHELF TOP SHELF BACK PANEL LOWER PANEL FRONT, BACK GUARDRAIL SIDE RAILS TOP DRAWER...
  • Page 4 STAIRCASE BOOKSHELF Attach the side rails (15) to the A upper panel (02) and B upper panel (03), STEP 1 using JCB M6 X 3 ½” (A), and barrel nut (F). Tighten with the Allen wrench (P). Twin upper panel shown. Full over Full bunk use Full upper panel. JCB M6 X 3 ½”...
  • Page 5 STAIRCASE BOOKSHELF Attach the guard rails (14) to the upper panel assemblies using JCB M6 X 3 ½” (A), STEP 3 and barrel nut (F). Tighten with the Allen wrench (P). JCB M6 X 3 ½” Barrel nut Allen wrench Adult assembly Attach the end guard rail (05) to the end caps (04), using wood dowels (I) and Allen screw M6 X 2”(C).
  • Page 6 STAIRCASE BOOKSHELF Attach the end guard rail assemblies to the upper panel assemblies as shown below, STEP 5 using wood screw (J), tighten with the Phillips head screwdriver. ( Customer supplied ) INSIDE VIEW Adult assembly ZOOM IN WOOD SCREW 1 1/4”...
  • Page 7 STAIRCASE BOOKSHELF Lay the full slat kit (23) onto the bed. Fix in place using wood screws provided in the slat kit box. STEP 7 FOR SLAT KIT ASSEMBLY follow assembly instructions included with slat kit. Adult assembly Customer supplied Phillips screwdriver Full size shown Twin lower panel uses Twin slat kit...
  • Page 8 STAIRCASE BOOKSHELF STEP 9 Insert wooden dowels (I) into the shelves (09)(10)(11) as shown below. WOODEN DOWEL Adult assembly STEP 10 Insert wooden dowels (I) into the bottom drawer (17) and middle drawer (20) as shown below. WOODEN DOWEL Adult assembly Page 8 of 13...
  • Page 9 STAIRCASE BOOKSHELF Attach the bottom shelf (09) to the bottom drawer (17) and back panel (12). Using Allen screw STEP 11 M6 X 2” (C). Tighten with Allen wranch (P). ALLEN SCREW M6 X 2” (50mm) Allen wrench Adult assembly Attach the middle shelf (10) to the middle drawer (20) and back panel (12).
  • Page 10 STAIRCASE BOOKSHELF Attach the top shelf (11) to the middle drawer (20) and back panel (12). Using Allen screw STEP 13 M6 X 2” (C). Tighten with Allen wranch (P). ALLEN SCREW M6 X 2” (50mm) Allen wrench Adult assembly Attach the top drawer (16) as shown below.
  • Page 11 STAIRCASE BOOKSHELF Attach back guard rail (06) as shown below. Using Allen screw M6 X 3 1/8” (E). STEP 15 Tighten with Allen wranch (P). ALLEN SCREW M6 X 3 1/8” (80mm) Allen wrench Adult assembly Attach side guard rail (07) as shown below. Using Allen screw M6 X 1 5/8” (D). STEP 16 Tighten with Allen wranch (P).
  • Page 12 STAIRCASE BOOKSHELF Attach hand guard rail (08) as shown below. Using Allen screw M6 X 3 1/8” (E) and M6 X 1 5/8” (D). STEP 17 Tighten with Allen wranch (P). ALLEN SCREW M6 X 3 1/8” (80mm) ALLEN SCREW M6 X 1 5/8”...
  • Page 13 STAIRCASE BOOKSHELF Move the bunk bed and staircase assemblies where you want to place them in the room. STEP 19 Attach staircase assembly to the bunk bed assembly as shown below. Using mini L bracket (L), wood screw D6 X 5/8” (K). Using flat bracket (M), wood screw D6 X 5/8” (K). Using L-Bracket (N), JCB M6 X 3/4”+ washer (B) and wood screw D6 X 5/8”...