Warning Type Fault Messages; Error Type Fault Messages - Dometic 10 Series Operating Manual

RML10.4, RML10.4S, RML10.4T

WARNING type fault messages

All faults of the WARNING type are reset automatically once the fault has been
rectified.
RML10.4,
RML10.4T
RML 10.4S
W01
W05
W06
W11
Beep
W10
+ beep

ERROR type fault messages

All faults of the ERROR type must be reset manually:
➤ RML10.4T: Press the control knob for 2 seconds.
➤ RML10.4 and RML10.4S: Press
✓ A beep sounds.
✓ The error has been reset.
EN
Fault
Defective temperature sen-
sor in the refrigerator com-
partment
AC power not connected or
AC voltage <190 V
DC power not connected
DC overvoltage (>16 V).
Tank stop mode: Gas opera-
tion is blocked for
15 minutes.
The door has been open for
more than 2 minutes.
for 2 seconds.
Troubleshooting
Solution
Contact an authorized customer
service point.
Connect the refrigerator to AC
power or select a different energy
type, e.g. gas or DC power.
Connect the refrigerator to DC
power or select a different energy
type, e.g. gas or AC power.
Reduce the DC supply voltage.
Wait 15 minutes or switch to another
operating mode.
Close the door.
35