Stand-Alone Gas Mode (Accessory) - Dometic 10 Series Operating Manual

Absorber refrigerator
Hide thumbs Also See for 10 Series:
Table of Contents

Advertisement

Available languages

Available languages

RML10.4, RML10.4S, RML10.4T
In tank stop mode
• RML10.4T: the symbol
• RML10.4 and RML10.4S: the
6.8

Stand-alone gas mode (accessory)

!
WARNING!
In stand-alone gas mode, the refrigerator must be switched off manually
during refueling.
I
NOTE
• When no AC or DC power is connected, there is a load on the
batteries even when the refrigerator is off.
• Remove the batteries when the refrigerator is not in use (risk of
leakage).
• If your vehicle manufacturer has installed the
ask the manufacturer about the connection point for the 9 Vg powerbank.
For stand-alone gas mode, the optional battery packs must be installed or the
optional Ø2,5/5,5 mm connector must be plugged into a 9 Vg powerbank
connecting to AC or DC power unnecessary.
When using 12 batteries (type AA), the refrigerator can be operated in stand-alone
gas mode for 2 to 3 days.
Please note the following special features when using stand-alone gas mode:
• The light inside the refrigerator remains switched off.
• The display turns off 2 seconds after the last activity.
• The display briefly switches on every 15 seconds. This indicates that the refriger-
ator is switched on.
• If there are error messages, the display stays switched on.
Stand-alone gas mode is
• RML10.4T: by the symbols
• RML10.4 and RML10.4S: by the flashing of
The batteries in the battery packs must be replaced
• RML10.4T: when the error "E 14" is displayed
• RML10.4 and RML10.4S: when the error
EN
is displayed
LED flashes
indicated
and
Using the refrigerator
Ø2,5/5,5 mm connector,
. This makes
LED every 15 seconds
/
is displayed
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rml10.4Rml10.4sRml10.4t

Table of Contents