Table of Contents
Advertisement
Assembly instructions
Intavis
Unhinging/removing sliding doors.
To unhinge the sliding doors, first release the upper runners of the rear door. To do this, push runner glides A and B downwards – the door is no longer in
the running track at the top.
Move the door backwards until the runner glides of the front door (A and B) are accessible. Push these down as well and remove front door. Then remove
rear door. Assembly takes place in the reverse order.
16
The ASSMANN principle. Good Work.
www.assmann.de
Advertisement
Table of Contents
Need help?
Do you have a question about the Intavis and is the answer not in the manual?