Amp Controls - Waves Guitar Tone Processor GTR Solo User Manual

A C
MP ONTROLS
A T controls Amp selection. Toggle through the Amps by clicking on the
MP YPE
text bar, or click on the arrow to the right of the text bar to reveal a drop-down list
displaying the 4 Amp groups: Bass, Clean, Drive, and High Gain. Click on an
amp group name to reveal a menu displaying the Amp types.
Range: Selection is described in section 1.1
Default: Clean
A B controls Amp activation/bypass. When set to Bypass, input is routed
MP YPASS
directly to the cabinet and mic.
Range: Bypass/On
Default: On
D controls the drive level range.
RIVE
Range: 0 to 10 (0 = -12dB, 10 = +12dB)
Default: 5 (5 = 0dB)
B controls low frequency equalization cut/boost.
ASS
Range: -5 to 5
Default: 0
M controls midrange frequency equalization cut/boost.
ID
Range: -5 to 5
Default: 0
Waves GTR Solo User Guide 12