Multi Preset Selection Editing...19 Grid Right Click Popup ...19 3.2 L ...20 OADING RESETS Open Preset file | Select Preset file drop down menu ...20 4. STANDALONE APPLICATION...21 The Preferences Dialog ...21 Audio ...22 MIDI...22 Waves GTR Solo User Guide...
Page 3
APPENDIX A GTR SOLO STOMPS ...23 OverDrive ...23 Distortion ...23 Flanger ...24 Vibrolo ...25 Phaser ...25 Chorus...26 WahWah...26 Pitcher ...27 Delay ...27 Spring ...28 Gate/Comp ...28 EQ ...29 Volume ...29 Waves GTR Solo User Guide...
Chapter 1 – Introduction 1.1 Welcome Thank you for choosing Waves! In order to get the most out of your Waves processor, please take the time to read through this manual. In conjunction, we also suggest that you become familiar with www.wavesupport.net.
UTOMATION GTR Solo is automatable using MIDI controllers and MIDI notes. MIDI controller mapping includes a “Learn” function which is accessed by right- clicking the designated control, and all mapping is saved with the preset. Waves GTR Solo User Guide...
NPUT ECTION is used to boost or attenuate input gain. NPUT Range: -18dB to +18dB Default: 0dB displays input level. NPUT ETER Range: -42dB to 0dBfs Default: -42dB Waves GTR Solo User Guide...
UTPUT ETER Range: -42dB to 0dBfs Default: -42dB mutes the GTR Solo output. UTPUT bypasses all GTR Solo processing. YPASS UTPUT bypasses the GTR Solo Amps. YPASS bypasses the GTR Solo Stomps. TOMPS YPASS Waves GTR Solo User Guide...
• OverDrive • Distortion • Phaser • Flanger • Chorus • Delay • WahWah • Spring • Pitcher • Vibrolo • GateComp • EQ • Volume See Appendix A for more information on individual stomps. Waves GTR Solo User Guide...
The Bass amp features a Direct Mix control in place of the Presence control. 2. The Cabinet section of each amp includes controls for Cabinet and Microphone setups, Cab Bypass and Air control. Waves GTR Solo User Guide...
• PRS Scorch Based on a boutique amplifier from Paul Reed Smith’s personal collection • PRS Crush Based on a modified 50W Marshall® MK2 amp is displayed with a silver panel and grill skin. • SolidState Based on a Hartke® 3500 Waves GTR Solo User Guide...
• Acme 12" Custom • Acme 2*12" Vintage • ACME 8" Open Back • Bass 8*10" Pro Waves GTR Solo User Guide Cabinets and microphones are selected by using the appropriate menu selector. Toggle through them by clicking on the text bar, or click on the arrow to the right of the text bar to display a drop-down list.
+5 cents or more. • The center dot lights up whenever the pitch is within the range of -10 to +10 cents from the desired pitch. • Both arrows light up when note is in tune. Waves GTR Solo User Guide...
Page 15
Default: Chromatic OTE CONTROLS • Clicking on a note name enables or disables it. • Enabled notes are displayed in white; disabled are displayed in gray. • Waves Tuner looks for the nearest enabled note. Waves GTR Solo User Guide...
(Unlocked indicates that the Preset may be edited.) To save “Locked” presets, either save to a new file or change the file's attributes to read and write from within your computer’s Operating System. Waves GTR Solo User Guide...
Page 17
• Tempo When checked, the Preset loads with a specific Tempo value. When unchecked, the value will remain at the manually entered setting when a new preset is loaded. To manually set a Tempo value, uncheck the box. Waves GTR Solo User Guide...
Presets can be renamed by selecting the name of an existing preset and editing it. This will not save the current preset over the preset saved in the selected preset cell. Waves GTR Solo User Guide … CURRENT PRESET NAME …| N...
2. Copy – Copy the current selection to the clipboard. 3. Paste – Paste at the last selection cell and shuffle forward 4. Delete – Fill the selected cells with empty presets. 5. Rename – Rename the preset. Waves GTR Solo User Guide DITING...
GTR Solo is fully closed. The next time, it must be opened from within the Open Preset File... menu. From then on, it will be available from the Preset File drop down. Waves GTR Solo User Guide RESET FILE DROP DOWN MENU...
• Preferences – Displays the preferences dialog for Audio, MIDI, and User Choices configurations. • Exit REFERENCES IALOG The preferences dialog allows configuration of Audio, MIDI, and User Choices. Preferences Dialog (Windows) Waves GTR Solo User Guide Preferences Dialog (Mac OSX)
Select the MIDI device through which to receive MIDI data. MIDI Output Device displays a list of available MIDI output devices on the current system. Load Previous Settings When checked, loads with last used settings; when unchecked, loads the Default settings. Waves GTR Solo User Guide...
Range: 0 – 100 Default: 50 Range: 700Hz – 10 kHz. Default: 3.9 kHz Waves GTR Solo User Guide controls the amount of effect applied to the signal. controls the output level. controls the output timbre. controls the amount of distortion applied to the signal.
TEREO difference between the left and right channels. Range: 0 to 100 Default: 50 Waves GTR Solo User Guide controls the depth or amount of flanging. controls synchronization to host tempo. controls the speed of the synchronized effect. controls the speed of the effect when not controls the length of the delay added to the signal.
ANUAL synchronized to host tempo. Range: 0 to 20 Default: 1 Waves GTR Solo User Guide controls synchronization to host tempo. controls the speed of the synchronized effect. controls the speed of the effect when not controls Frequency Modulation depth.
Default: Auto mode. Range: 0 to 1 Default: 0.5 Waves GTR Solo User Guide varies the LFO (Low Frequency Oscillator) phase controls the amount of detune effect applied to the controls the speed of the detune effect’s modulation controls the sensitivity of the envelope follower controls both the Attack and Release controls of filter controls the frequency around which the Wah works.
Please note: Feedback levels above 8.7 may result in clipping or feedback. Range: 0 to 10 Default: 5 Waves GTR Solo User Guide (Shift) controls the range of pitch shift. controls synchronization to host tempo.
Range: inf to 0dB (FS) Default: -60 signal. Range: 0 to 100 Default: 50 Waves GTR Solo User Guide rolls off high frequencies. controls the position of the delay regenerations controls the reverb decay time. controls the delay between the start of the direct controls the sensitivity of the gate.
Volume bar is in the Hi position. Range: -144dBfs – +12dBfs. Default: 0dBfs. Please note: Since Max control limits the Min control, Min value may not exceed Max value. Waves GTR Solo User Guide controls output level. The position (HI > LO)