Loading Presets And Setups; Saving Presets And Setups - Waves Dynamics Processor MV2 User Manual

Loading Presets and Setups

Click-and-hold on the Load button to see the Load pop-up menu. The menu is divided
into four sections. If a section is not currently available it will not appear in the Load pop-
up menu.
Open Preset File... Select to open any setup or preset file, whether from the Library or
'Filename.xps':
Factory Presets:
User Presets:

Saving Presets and Setups

Click-and-hold on the Save button to see the Save pop-up menu. Four options are
available. If an option is not currently available it will be grayed out and inaccessible.
Save to New File...
Save 'File Name' – "Preset Name" Overwrites the settings of the loaded preset
Save to 'File Name' As...
Put into Preset Menu As...
your own creations.
Displays any currently loaded Setup File and its presets.
Displays the default Factory Presets.
Displays any loaded User Presets.
Select this to start a new Setup file. There are two
prompts - first for the setup filename, then for the
preset name. You must provide a name for both the
setup file and the preset. Click OK (ENTER) to
complete the save. It is a good idea to create a
folder in which to save several setup files for a
project.
(whether a User Preset or a preset from a Setup
File) with the current settings. If a Setup File is
currently loaded, the name of the Setup File is
displayed followed by the name of the preset itself.
If a User Preset is loaded, its name is displayed.
Saves the current settings as a new preset into the
Setup file that is open (if one is not open, the option
is grayed out). You will be prompted to give the
preset a name.
Save the current settings into a User Preset that
will always be in your Load menu (until deleted).
You will be prompted to give this preset a name.
User Presets are stored in the plug-in's preference
file.
MV2 User Manual
10