Table of Contents
Advertisement
Addonics Technologies – Jupiter ExDrive User's Guide v1.0
Step 3
Wrap the shock absorbers around
the hard drive and PCB.
Step 4
Turn over the PCB and secure the
hard drive to the PCB with the
mounting screws that come with the
kit.
Step 5
Mount the board to the bottom
cover.
Step 6
Put the top cover on by holding it in near
vertical position and sliding th e two
metal clips inside the two small slots on
the rear of the bottom cover.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the Jupiter ExDrive and is the answer not in the manual?
Questions and answers