Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Addonics Technologies ExDrive
Summary of Contents for Addonics Technologies ExDrive
- Page 1 Addonics Technologies ExDrive User Guide Revision 2.7...
-
Page 2: Table Of Contents
Table of Contents I. Introduction FCC Warning Statement Welcome Hardware Requirement Operating System Requirement Introduction Package Contents II. Installation & Operation Hardware Installation Driver Installation ExData Pro Installation III. Troubleshooting... -
Page 3: Fcc Warning Statement
FCC Warning Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. -
Page 4: Welcome
Your comments are valuable to us for further improvement to our existing and future products and services. In order for us to keep you informed of any updates on the ExDrive, or on any new products or services from Addonics Technologies, please go online www.addonics.com... -
Page 5: Introduction
Introduction Introduction To The Portable Hard Drive The Addonics Technologies ExDrive is a small, lightweight and portable 2.5” Hard Disk Drive which comes in capacities starting at 2GB. The unit is external and uses the PCMCIA socket or USB port, so there is no need to open up your computer since there are no cards to install, and no special tools are required for installation. -
Page 6: Package Contents
Package Contents Addonics Technologies 2.5” ExDrive PCMCIA (No Driver needed) or UBS Cable (One driver floppy) ExData Pro Software (Optional) AC Power Cable Owner’s Manual & Registration Card PCMCIA Package USB Package... -
Page 7: Hardware Installation
1. Make sure the power is off on both your computer and the ExDrive. 2. *For empty ExDrive case users only: • PCMCIA and USB installation are the same. a). Press down the middle of the case and pull it apart. - Page 8 b). Connect the 2.5” IDE hard disk to the connector on the IC broad. Note: Make sure pins match the connecter c). Secure the HD on the IC board with 4 screws after connecting. Note: Do not screws the screws too tight...
- Page 9 d). Get ready to put everything back together. Note: Do not connect power at this time Connect the Portable Hard Drive to your computer’s PCMCIA or USB port with the supplied PCMCIA or USB cable. Turn on your computer and Portable Hard Drive’s power. Get ready to plug in the device.
-
Page 10: Driver Installation
USB devices do not support Windows 95 and Windows NT. For USB users: 1. Make sure your ExDrive is powered on and the USB cable is attached, then plug the USB cable into your computer. 2. The Windows 98 will find the new hardware when you plug in the device at the first time, and it will ask you to insert the driver diskette. - Page 11 3. After you insert the diskette, don’t just click OK. Click on the down arrow sign next to the browse button. 4. Select A: (Assuming your floppy disk drive letter is A), and click “Browse”.
-
Page 12: Exdata Pro Installation
5. Look into the “USB Win98” folder to highlight the “falstaff.sys” file, and then click OK. 6. Click OK again to start installing the driver. 7. Now Windows will start to install the driver. You should restart your computer after the driver installation. ExData Pro Installation (Optional) You can order ExData Pro to comes with your package. -
Page 13: Troubleshooting
(b) Make sure the drive was securely connected to the PCMCIA socket or USB port of your computer. Problem: The power light of the ExDrive is lit, and the Device Driver was installed correctly. However, the system can’t assign a drive letter for it. - Page 14 Problem: I formatted the hard drive. But I still can’t see the drive. Answer: Did you format the HD with a NT workstation? Make sure the file system on the 2.5” hard drive matches your operating system. Windows 95/98 does not support NTFS. Phone: (510)-438-6530 Fax:...
Need help?
Do you have a question about the ExDrive and is the answer not in the manual?
Questions and answers