Addonics Technologies CRT535PES User Manual

Cipher raid tower

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

T E C H N O L O G I E S

Ci ph er

eS AT A

User Guide

Cipher RAID Tower

(CRT535PES)

www.addonics.com

HDD

Ci ph er Ch ai n

PW R

v5.1.11

Table of Contents

Need help?

Do you have a question about the CRT535PES and is the answer not in the manual?

Page 1 T E C H N O L O G I E S Ci ph er Ci ph er Ch ai n eS AT A PW R User Guide Cipher RAID Tower (CRT535PES) www.addonics.com v5.1.11 Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212...
Page 2 IMPORTANT There is no back door for the Cipher tower encrypted hard drives if the Cipher keys are lost or stolen. Cipher key Check to make sure you have the correct version of the Cipher key. A sample key is shown Black label AES-256 stands for Cipher 256-bit key.
Page 3 HD LED Auxillary Power Switch HD LED HD Power Switch HD D Ci ph er C ip he rC ha in eS AT A PW R eSATA Port Power & HDD LED Cipher Keyhole Connecting the power cable and Cipher Tower to the computer Connect the power cord provided from the wall outlet to the back of the Cipher Tower.
Page 4 III. Initial setup of the Cipher tower: Insert the AES 256-bit cipher key into the cipher keyhole located at the front of the Cipher tower. Power on the Cipher tower. Observed that the green Cipher power LED at the front of the Cipher tower is on. If not, reinsert the cipher key and re-power the Cipher tower.