Advertisement
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Panel brackets • D) #6 x 3/8" Phillips screws (2) • E) Panel clips (2)
A
Metra. The World's Best Kits.
®
Mercedes-Benz S Class
Visit
specific applications
KIT FEATURES
• ISO DDIN radio provision
• 95-8734B is scratch resistant matte black
• 95-8734W is woodgrain
B
MetraOnline.com
2000-2006
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
C
D
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Visit metraonline.com for
harness and interface information
Antenna Adapter: 40-VW12 or 40-EU10
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx T20 screwdriver
E
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
95-8734
REV. 6/18/20 INST95-8734
Advertisement
Table of Contents
Related Manuals for Metra Electronics 95-8734
Summary of Contents for Metra Electronics 95-8734
- Page 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 6/18/20 INST95-8734...
- Page 2 DASH DISASSEMBLY 2000-2002 2003-2006 1. Open the ashtray compartment door, 1. Open the ashtray compartment door, remove (2) Torx T20 screws securing remove (2) Torx T20 screws securing the ashtray assembly, then remove and the ashtray assembly, then remove and unplug the ashtray assembly.
- Page 3 KIT PREPARATION KIT ASSEMBLY 1. Attach the panel brackets to the radio 1. Attach the (2) supplied panel clips to the trim panel with the two supplied radio housing. (Figure A) #6 x 3/8” Phillips screws. (Figure A) 2. Attach the radio brackets to the radio 2.
- Page 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 6/18/20 INST95-8734...
Need help?
Do you have a question about the 95-8734 and is the answer not in the manual?
Questions and answers