Important!
When using the equipment, a number of safety
precautions must be observed to avoid injuries
and damage. Please read the complete operating
instructions and safety information with due care.
Keep these operating instructions in a safe place
so that the information is available at all times. If
you give the equipment to any other person, hand
over these operating instructions and the safety
information as well. We cannot accept any liabi-
lity for damage or accidents which arise due to
failure to follow these instructions and the safety
information.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Caution!
Read all the safety information and instruc-
tions. Any errors made in following the safety
information and instructions may result in an elec-
tric shock, fi re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.
a) The charging unit is not allowed to be used
for non-rechargeable, normal batteries.
b) Suffi cient ventilation is required.
c) The current and voltage information on the
battery pack must be the same as that on the
charging unit.
d) Do not expose the charging unit to splashwa-
ter or rain.
e) The charging unit must be disconnected
from the socket outlet before the cordless
screwdriver is inserted into or removed from
the charging station.
f)
Do not throw old or damaged batteries into
water or fi re. Follow the environmental protec-
tion directives.
g) A defective or no longer chargeable battery
must be treated as special waste. Dispose of
it at a special collection point. Do not dispose
of it with your normal household waste or th-
row it into water or fi re.
h) Place the charging unit away from all sources
of heat.
i)
To reduce the risk of electric shock, pull the
power plug out of the socket outlet by the plug
itself and not by the cable when you want to
disconnect the charging unit from the power
supply.
j)
Do not take the charging unit apart. Take it
GB
to an authorized repair center if servicing or
repairs are needed. Incorrect assembly can
result in an electric shock and even death or
fi re.
k) This equipment is not designed to be used by
people (including children) with limited phy-
sical, sensory or mental capacities or those
with no experience and/or knowledge unless
they are supervised by a person who is res-
ponsible for their safety or they have received
instructions from such a person in to how to
use the equipment safely.
l)
Children must always be supervised in order
to ensure that they do not play with the equip-
ment.
2. Layout (Fig. 1)
1. Charging unit
2. Charging cable
3. Technical data
Charging unit:
Input: ...........................200-260V~50-60Hz, 72W
Output: ................................10-21V DC, 3000mA
Important.
The charging unit is allowed to be used only for
the lithium-ion batteries of the Power-X-Change
series!
- 12 -
Need help?
Do you have a question about the Power-X-Charger and is the answer not in the manual?
Questions and answers
power x charger 18v einhell quando inserisco la batteria nel caricabatteria il led rosso lampeggia e nn riesco a capire se si carica o no. I led della batteria lampeggiano solo ogni tanto
The red LED flashing on the EINHELL Power-X-Charger indicates that the charger is in slow charge mode. This can happen if:
- The battery has not been charged for a long time or was deeply discharged.
- The battery temperature is not within the ideal range of 25°C to 45°C.
You can tell if the battery is charging because the green LED will start flashing after the charger is connected to the mains and the battery is inserted.
This answer is automatically generated