Advertisement
5
Filter replacement and reset
Philips GoPure Car air
purifier is composed of
a multi-layer filtration
system that guarantees
the most effective air-
purification. All filter layers
are assembled in one single
simple-to-replace filter.
m Important
Philips GoPure car
air purifier indicates
automatically when you
must change the filters.
When the filter needs
to be replaced, the AQI
indicator will alert in
yellow blinking light.
Replace the filter immediately
using only genuine Philips
GoPure filter.
It helps maintain the
maximal performance of
your Car air purifier and
helps to provide the purest
air quality inside your car.
5.1 How to replace the filter
1 Disconnect GoPure car
air purifier device.
2 Lifting up the rear side of
top cover and remove it.
4 Using the groove,
insert a new original
GoPure filter.
m Important
The filter slides in only
one way, do not force it
in. See above.
5.2
How to reset GoPure car
air purifier after
a filter replacement
m Important
You must reset the
Philips GoPure device
after every filter
replacement.
1. Plug the device into the
power supply and turn
off the device.
2. Touch and hold power
button for 5 seconds
until you hear a beep
sound. The device
will be turned into
filter reset process.
Wait for another 5
seconds until the AQI
color changes to blue,
indicates filter reset
successful.
3. Repeat the above steps
if the filter rest fails.
8
Advertisement
