Advertisement
Advertisement
Table of Contents
Related Manuals for Mamiya Mirror-up Cable Release
Summary of Contents for Mamiya Mirror-up Cable Release
- Page 1 Mirror-up Cable Release English Instructions...
- Page 2 At slower shutter speeds, vibration caused by the camera’s mirror returning to its down position may cause a loss in image sharpness (mirror shake). The Mirror-up Cable Release prevents mirror shake by employing a two-step shutter release procedure. With a half-press of the cable release’s plunger, the mirror is raised to its up position. Next, the plunger is fully pressed;...
- Page 3 Screw the black-tipped cable into the knob until it is snug. Screw the chromium-tipped cable into the camera’s Cable Release Socket. The camera is now ready for mirror-up photography. Fully depress the camera’s Cocking Lever. Hold the cable release’s Grip, and then gently press the release’s plunger. The mirror will raise to its up position.
- Page 4 If the projection is too long: Loosen tip ring (1) by turning it in the direction of arrow (A). Turn ring (2) in the direction of arrow (C). Tighten ring (1) by turning it in the opposite direction of arrow (A).
Need help?
Do you have a question about the Mirror-up Cable Release and is the answer not in the manual?
Questions and answers