Advertisement
Quick Links
Advertisement
Related Manuals for Mamiya Power Winder II RZ
Summary of Contents for Mamiya Power Winder II RZ
- Page 1 Power Winder II RZ English Instructions...
-
Page 2: Specifications
Special Features The Power Winder II RZ fits conveniently under the RZ67 camera body and attaches to the camera via its tripod mount. The winder cocks the shutter, advances the film to the next frame and moves the camera’s mirror to its down position after the shutter is fired by: ... -
Page 3: Installing The Batteries
Weight 530g without batteries. Installing the Batteries Move the Battery Cartridge Chamber Release Lever in the direction of the arrow, Fig. 1, and then remove the Battery Cartridge from the winder. Insert 6 AA alkaline/manganese, or 6 AA NiCad batteries, into the Battery Chamber while matching the polarity markings on the batteries with those of the cartridge, Fig. - Page 4 Open the camera’s Winder Cover, Fig. 5, by sliding it in the direction of the arrow. Place the Power Winder II RZ on the base of the camera body, Fig. 6, making sure that the winder’s two Alignment Pins fit into the holes in the camera’s base.
- Page 5 After the film has advanced to the first frame, press the camera’s Shutter Release Button. The Power Winder II RZ will advance the film to the next frame, cock the lens’ shutter and move the camera’s mirror to its down position.
- Page 6 If this occurs, press the Start Button again. Using the Power Winder II RZ with RB67 Series Lenses The winder will immediately start winding the film after pressure is released from the camera’s Shutter Release Button, even if the shutter is still open.