Care And Storage - Zeiss Victory PhotoScope 85 T FL Instructions For Use Manual

Instructions for use
Congratulations on your having the new PhotoScope 85 T* FL, which will provide you
with fascinating visual experiences and simultaneously impressive digital pictures.
As with all Carl Zeiss products, the PhotoScope 85 T* FL is characterised by outstanding
optical performance, precise workmanship and long service life.
Carefully read through the following operating instructions, so that you get optimal use
of your PhotoScope 85 T* FL and it will be your reliable companion for many years.
Practice, precise settings and photographic knowledge are also very helpful.
Our customer service is available for you from Monday to Friday from 8:00 am until
6:00 pm (CET).
Tel.: +49 (0) 64 41 - 4 67 61
Fax: +49 (0) 64 41 - 4 83 69
Please note that the controls, components, menu options, etc. of your product can differ
slightly from those shown in these operating instructions.
The SD logo is a trademark.
Other printed names, companies and product designations in the operating instructions
are trademarks or registered trademarks of the corresponding companies.

Care and storage

The PhotoScope does not require special care. Do not wipe coarse dirt particles (e.g. sand)
off from the lenses or the monitor, but rather blow off or remove with a hair brush.
Finger prints can attack the surface after a while. The simplest method of cleaning this type
of optical surface is to breathe on it and softly rub with a clean optical cleaning cloth.
Condensation/fogging can form on the monitor and outer lenses with strong temperature
fluctuations. Clean this with a soft, dry cloth.
Dry storage and good ventilation, especially in the tropics, help to prevent a possible mould
film on the optics.
The Cordura case included in the scope of delivery or the carrying case available as an
accessory are suitable primarily for safe storage and transportation.
(order no. 1678-578).
12