Basic Service; Technical Data - PROEL BLACKMOON 575 WASH User Manual

BASIC SERVICE

Regular cleaning of the elements in the optical path, as well as the air vents, is vital to maintaining the
operational quality of the PLML575CNXP.
Important! Excessive dust, smoke fluid, and particulate build-up degrades performance and causes
overheating and damage to the fixture that is not covered by the warranty.
Cleaning the air vents:
To maintain adequate cooling, dust must be cleaned from the air vents periodically. Remove dust from
the air vents with a soft brush, cotton swab, vacuum, or compressed air.
Cleaning optical components:
Clean the optical components regularly. The presence of smudges or dust on optical surfaces can
reduce the strength of the light output and the quality of the effects.
Use care when cleaning optical components and work in a clean, well lit area. The coated surfaces are
fragile and easily scratched. Do not use solvents that can damage plastic or painted surfaces.
Disconnect the fixture from power and allow it to.
-
Remove upper cover.
-
Vacuum or gently blow away dust and loose particles with compressed air.
-
Remove stuck particles with an unscented tissue or cotton swab moistened with glass cleaner or
-
distilled water. Do not rub the surface: lift the particles off with a soft repeated press.
Remove smoke, and other, residues with cotton swabs or unscented tissues moistened with
-
isopropyl alcohol. A commercial glass cleaner may be used, but residues must be removed with
distilled water. Clean with a slow circular motion from center to edge. Dry with a clean, soft and lint-
free cloth or compressed air.
Close the fixture cover and tighten the thumb screw, taking care not to trap any loose wires.
-

TECHNICAL DATA

PLML575CNXP
Power supply: 230V – 50Hz
Consumption: 750W
Led: HMI 575W/S
Dimensions: LxPxH mm.490x470x565
Weight: kg. 26
18