Carrying Out The Blood Pressure Measurement - Silvercrest 326870 Instructions For Use And Safety Notes

After the full-screen display, the last measurement result saved
will be displayed. If no measurement has been saved, the de-
vice will display the value of "0".
After 5 seconds, the blood pressure monitor will begin with
the measurement by pumping up the cuff. The measurement
is taken while the cuff is being pumped up. As soon as a pulse
has been detected, the pulse symbol
After this, the cuff air pressure will be released again.
The measurement results for systolic pressure, diastolic pres-
sure and pulse will be displayed.
38 US-EN
6870_silv_Blutdruckmessgeraet_Content_US.indd 38
Carrying out the blood
pressure measurement
Place the cuff on your arm as previously described and
assume the position in which you wish to carry out the
measurement.
Switch on the blood pressure monitor using the START /
STOP button
8
You can stop the measurement at any time by pressing
the START / STOP button
If the measurement has not been carried out correctly,
"Er_" will be displayed (see "Troubleshooting" also).
Repeat the measurement process in the event that this
happens.
The measurement result will be saved automatically.
If you have activated Bluetooth
will be transferred. The blood pressure monitor displays
the symbol for Bluetooth
the blood pressure monitor off by pressing the START /
STOP button once more.
.
will be displayed.
.
8
®
data transfer, the data
®
transfer during transfer. Switch
04.07.19 09:1