Initial Use; Inserting / Replacing Batteries - Silvercrest 326870 Instructions For Use And Safety Notes

Initial use

Verify the parts listed in the scope of delivery are complete.
Remove all packaging material.

Inserting / Replacing batteries

Slide the battery cover off the battery compartment
11
Insert the four type 1.5 V AAA (Alkaline type LR03)
batteries (with the correct polarity) into the device. Please
note the marking inside the battery compartment.
11
Carefully close the battery cover on the battery com-
partment .
11
Do not use rechargeable batteries.
Note: If the battery indicator is displayed continu-
17
ously, measurement is not possible and you must replace
all of the batteries with new batteries. As soon as the
batteries have been removed from the device, the date
and time will be reset.
30 US-EN
6870_silv_Blutdruckmessgeraet_Content_US.indd 30 04.07.19 09:1