Replacing An External Bulb; Main Beam/Dipped Beam Headlights; Led Main Beam/Dipped Beam Headlights/Fog Lights; Front Direction Indicators - Fiat 500X Owner's Handbook Manual

REPLACING AN
EXTERNAL BULB

Main beam/dipped beam headlights

(halogen)
To replace the bulb, proceed as follows:
working from inside the engine
compartment, remove the rubber cap A
fig. 119, using the dedicated tab;
119
press the electric connector B
fig. 120 downwards to release the
bulb and bulb holder assembly from
the housing;
120
pull out the bulb holder outwards;
disconnect the electrical connector B
and replace the bulb C.
then insert the bulb and bulb holder
assembly in its housing and press it
until you hear it lock. Make sure it is
locked correctly;
F1B0146C
refit the rubber cap A.
IMPORTANT Only replace the bulb
when the engine is off. Also ensure that
the engine is cold, to prevent the risk of
burns.
LED main beam/dipped beam
headlights
For replacing these bulbs, contact a
Fiat Dealership.
Side lights/daytime running lights
(DRL)
The side lights/daytime running lights
(DRL) are LED-type. To replace them,
contact a Fiat Dealership.

Front direction indicators

To replace the bulbs, proceed as
follows:
F1B0710
121
122
steer the car wheels completely
inwards;
undo screws A fig. 121 using the
screwdriver provided and remove
inspection flap B;
identify the direction indicator bulb;
F1B0147
F1B0253C
155