Westfalia 94 61 29 Instruction Manual page 23

Do not use oxygen or flammable gases as source of energy. The air tools
should only be operated with clean, dry air with max. 6.2 bar. When using
higher pressure for operating the air tools, self life of the air tools will be
reduced drastically.
Disconnect the air tools from the compressed air source before doing any
maintenance work or before exchanging the tool (socket, chisel, etc.).
Check if all connections and hoses are mechanically secured and if they are
functioning properly. Loose hoses may cause severe injuries. Only use safety
couplings.
Check all tools and accessory before use for damage and do not continue
using them in case of damage.
Only use impact-quality sockets and accessories with the air ratchet wrench
or the air impact wrench.
Avoid abnormal posture. Make sure you have a firm foothold and you always
hold the balance.
Be attentive! Pay attention to what you are doing. Approach your work with
circumspection.
Do not use the air tools when your reactivity is affected by alcohol
consumption, medication, drugs, illness or tiredness. One moment of
abstraction operating the unit can cause grave injuries.
Keep your work area clean. Disorder can cause accidents.
Take care of adequate lighting.
Attention! Beware of flying chips when working with the air hammer.
Do not open the units and do not try to repair them yourself. Contact a
professional or our customer service. Only use original replacement parts.
Safety Notes
18