Fry Tank - Vulcan-Hart GHF90G Service Manual

FRY TANK

WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
WARNING: ALL GAS JOINTS DISTURBED DURING
SERVICING MUST BE CHECKED FOR LEAKS.
CHECK WITH SOAP AND WATER SOLUTION
(BUBBLES). DO NOT USE AN OPEN FLAME.
1. Disconnect fryer from main gas supply.
2. Drain oil from tank.
3. Remove baskets, fryer basket hanger and
crumb screen.
4. Remove screws holding fry tank.
5. Remove burners as outlined under Burners.
6. Remove the manifold bracket from the tank
assembly.
7. Remove thermostat and high limit as outlined
under Thermostat and High Limit.
8. Remove screws holding pilot assembly to
bracket and remove pilot assembly.
9. Lift the fry tank up and out of cabinet. Carefully
place the tank assembly on the floor (this
procedure requires two people).
10. Remove the tank ball drain valve.
11. Reverse the procedure to install new tank.
– 8 –