Removal And Replacement Of Parts; Covers And Panels; Door; Front Panel - Vulcan-Hart GHF90G Service Manual

REMOVAL AND REPLACEMENT OF PARTS

COVERS AND PANELS

WARNING: SHUT OFF THE GAS BEFORE
SERVICING.

Door

1. Open door and using a
remove (2) screws securing the top door
mounting bracket to the left body side channel.
2. Hold door in one hand and lift the door panel
assembly off of the bottom hinge.
3. Reverse this procedure to reinstall the door
panel.

Front Panel

1. Using a flat head screwdriver, remove (2)
screws holding the front panel in place.
2. Remove the panel from the unit.
3. Remove heat shield.
5
/ " wrench or ratchet,
16
– 4 –

BURNERS

WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
1. Open door panel.
2. Loosen (Do not remove) the two mounting
bolts at the top of each burner.
3. Push burner up while pulling the bottom of the
burner forward to clear the burner nozzle.
4. Reverse the procedure to install.