Kogan 9 Series User Manual page 7

Remove the transit bolts
To protect the machine in transportation, there are 4 bolts inserted into the inner part of the
machine to keep the drum in place. These bolts must be removed before use, or damage to
the internal components of the machine or surrounding environment may occur.
1. Unscrew each of the four bolts with a spanner.
2. Remove the bolts horizontally.
3. Fit the lid into the holes.
•
Keep the transit bolts in a safe place, as they will be needed to transport the
machine in future as required.
•
As shown above, confirm that the base protection device is not stuck at the bottom
of the washing machine before use.
Base protection device